6 cluster setup, Introduction, Preliminary operations – HP VA 7400 User Manual

Page 41: Cluster setup

VA 7100/7400 Cluster Installation Guide

10/12/01

6 Cluster

Setup

Introduction

This chapter provides detailed instructions for performing the cluster setup.

Preliminary Operations

The following preliminary operations must be successfully completed before beginning the

1. Ensure that all requirements detailed in chapters 2 through 5 have been thoroughly reviewed and successfully

completed.

2. Ensure that storage array is powered up and maintained in accordance with the procedure of chapter 3.

3. Ensure that node 1 is powered up and running.

4. Ensure that node 2 is powered up but in Pause mode. Refer to step

of the

chapter 5.

5. Ensure that the cluster Configuration Worksheet located in Appendix A has been completely filled out.

6. On the node 1 Windows 2000 Configure Your Server window shown below, click Finish setup.