Drying system, Overfill protection float – haier ESD402 User Manual
Page 38
Serial Number: Version:00.00
Edition: Nov.-23-2005
Built-In Dishwasher
Model: ESD400/ESD401/ESD402
Page
37
/ 48
particles from redepositing on the clean dishes.
The wash water continuously flows through the filter, trapping food particles.
-Two water jets, located under the spray arm, remove the food particles from the filter.
-A coarse strainer prevents bones, pits, and other large objects from entering the pump system.
12.Drying System
During drying, you can see steam escaping through the vent at
the upper left corner of the door. This is normal as the heat dries
your dishes.
13.Overfill Protection Float
The over fill protection float (in the front right corner of the dishwasher tub)
keeps the dishwasher from overfilling. It must
be in place for the dishwasher to operate. Check under the float for objects that
may keep the protector from moving up or down.
NOTE: Periodically check the coarse strainer and remove any
objects on the strainer.
IMPORTANT: The vapor is hot. Do not touch the vent.