haier ESD402 - Manual (Page 28)

Serial Number: Version:00.00 Edition: Nov.-23-2005
Built-In Dishwasher Model: ESD400/ESD401/ESD402
Page 27 / 48
8.START-UPGUIDE
Before using your dishwasher, remove all packaging materials.
Using New Dishwasher
1. Rinse aid is essential for good drying. Be sure to fill the dispenser before you use your new
dishwasher. Each filling will last about 1 to 3 months depending on your usage.
2. Scrape large food soil and hard items (toothpicks or bones) from dishes. You do not need to
pre-rinse your dishes.
3. Properly load the dishwasher. (See" Dishwasher Loading.") Load
dishes with space in between so water will reach the soiled surfaces.
Make sure nothing prevents the spray arm(s) from spinning freely.
4. Add detergent. Always use a quality brand detergent.
5. Close the door.
6. Press the desired cycle and option selections. The dishwasher starts filling
when you press a cycle. You can select options as the machine fills (See "
Dishwasher Use.")
9.DISHWASHER LOADING
-Remove leftover food, bones, toothpicks and other hard items from the dishes. To conserve water, energy and save
time, it is not necessary to rinse dishes before putting them into the dishwasher. The wash module removes food particles
from the water. The module contains a chopping device, which will reduce the size of food items.
NOTE: If hard items such as fruit seeds, nuts, and eggshells enter the wash module, you might hear chopping, grinding,
crunching, or buzzing sounds. These sounds are normal when hard items enter the module. Do not let metallic items
(such as pot handle screws) get into the wash module.
Damage can occur.
-It is important for the water spray to reach all soiled surfaces.
-Load dishes so they are not stacked or overlapping if possible. For best drying, water must be able to drain from all
surfaces
-Load heavy pots and pans carefully. Heavy items can dent the stainless steel interior of the door if they are dropped