haier ESD402 - Manual (Page 36)

Serial Number: Version:00.00 Edition: Nov.-23-2005
Built-In Dishwasher Model: ESD400/ESD401/ESD402
Page 35 / 48
You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser If the cover
is still closed, you can add items.
TO add items
1. Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door.
2. Open the door. If the detergent dispenser cover is still closed, add the item.
3. Close the door firmly until it latches. The dishwasher resumes the cycle after about a 10 seconds pause.
10.7 Option Selections
You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option
off. Select a different option if desired. You cancel change an option anytime before selected option begins. For example,
you can press an unheated drying option anytime before drying begins.
Hi-Temp Wash
Select this option to heat the water during parts of the cycle. Higher water temperatures helps clean tough soils. Hi-Temp
Wash, with the Pots & Pans, Normal raises the water temperature in the main wash. This option adds heat, water and
wash time to a cycle.
NOTE: Hi-Temp Wash is an option with the Pots & Pans and Normal cycles. Always use Hi-Temp Wash if you have hard
water. You can’t change this option after the first filling.
NOTE: Anti- bacteria Wash automatically uses this option. Sanitize Rinse is an option with the Pots & Pans, Normal cycle.
Only these sanitization cycles have been designed to meet the NSF/ANSI requirements. You can’t change this option
after the main wash complete. If you change this option, the remaining time displayed by LED will reduce/add 3 minutes.
Heated Dry
Select this option to dry dishes with heat. The dishes take longer to dry and some spotting can occur For best drying,
always use a liquid rinse and. Some items (such as plastics) may need towel drying.
NOTE: Heated Dry is an option with Anti-bacteria Wash, Pots and Pans Wash, Normal and China cycles. If you change
this option, the remaining time displayed by LED will add/reduce 25 minutes.
Sanitize Rinse
Select this option to raise the Water temperature in the final rinse approximately 160 F (71 * ). The Sanitize Rinse Option
adds heat and time to the cycle, This high temperature rinse sanitizes your dishes and glassware in accordance With
NSF/ANSI standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food
establishments.
Child Lock (On ESD310/311/312 models)
Use Child Lock to prevent un intended use of the dishwasher. You can also use the Child Lock feature to prevent
unintended cycle or option changes during a cycle. When Child Lock is lit, all buttons are disabled.
NOTE: The dishwasher door can be opened while the controls are locked.
To turn on the Lock
Press and hold heated dry button for 3 seconds. Child Lock glows.
If you press any pad while your dishwasher control is locked, the light flashes 3 times and selection is ignored.
To turn off the Lock
Press and hold Heated Dry button for 3 seconds. The light turns off.
Delay Start (On ESD310/311/312 models)
Select this option to run your dishwasher at a later time or during off-peak hours. You can add items to the load anytime
during the delay countdown. After adding items, close the door firmly until it latches. The delay countdown will not
continue if the door is not latched. You can delay the start of a cycle up to 12 hours. The first time you use Delay Start, you
will see showing a 1-hour delay.