beautypg.com

Built-in dishwasher, 1 loading top rack – haier ESD402 User Manual

Page 29

background image

Serial Number: Version:00.00

Edition: Nov.-23-2005

Built-In Dishwasher

Model: ESD400/ESD401/ESD402

Page

28

/ 48

or bumped.

-Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not interfere with the spray arm rotation.

-Conserve water, energy and save time over hand rinsing by running a rinse cycle to keep dishes moist if you do not

plan to wash them soon. Foods such as eggs, rice, pasta, spinach, and cooked cereals may be hard to remove if they

are left to dry over a period of time.

Quiet operating tips

-To avoid thumping/clattering noises during operation: Make sure lightweight load items are secured in the racks.

-Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not touch interior walls or interfere with the rotation

of the spray arm.

-Load dishes so they do not touch one another.

NOTE: For built-in models, keep sink drain plugs closed during dishwasher operation to prevent noise transfer through

drains.

9.1 Loading Top Rack

The top rack is designed for cups, glasses, and smaller items, Many items, up to 9

in. (22 cm), fit in the top rack. (See

recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the drawings shown.

-Place items so open ends face down for cleaning and draining.

-Load glasses and cups in top rack only. The bottom rack is not designed for

glasses and cups. Damage can occur.

-Place cups and glasses in the rows between tines. Placing them over the tines

can lead to breakage and water spots.

-China, crystal, and other delicate items must not touch each other during

dishwasher operation. Damage may occur.

-Load plastic items in the top rack only. Only plastic items marked "dishwasher

safe" are recommended.

-Load plastic items so the force of the spray does not move them during the cycle.

-To avoid chipping, do not let stemware touch other items.

-Small bowls, pans, and other utensils can be placed in the top rack. Load bowls

in the center section for best stability.

Utility shelf

Fold down the extra shelf on the left or right side of the top rack to hold

additional cups, stemware or long items such as utensils and spatulas.

Adjustable 2-position top rack

You can raise or lower the top rack to fit tall items in either the

top or bottom rack. Raise the top rack to accommodate items

up to 7.1 in. (18 cm) in the top rack and 12.2 in. (31cm) in the

bottom rack, or lower the top rack to accommodate items up to

9 in. (23 cm) in the top rack and 10.2in. (26cm) bottom racks.

Adjusters are located on each side of the top rack.


To remove the top rack

1. Pull the rack forward slightly to access track stops.