Switching source signals, Adjusting the volume, Switching source signals adjusting the volume – HANNspree DT04-12A1 User Manual

Page 28: Switching source signals press the, Adjusting the volume press the, Button to increase the volume. press, Button on the remote control or press the, Source, Vol up, The vol down

Switching Source Signals

Press the

SOURCE

button on the

remote control or the TV button on
the control panel to select the
incoming source signal.

The current source setting CH XX
appears on the top left corner of
the screen, AV1 or AV2 appears
on the bottom right corner of the
screen.

Note:

The TV supports S-Video input in addition to normal video and audio
signals. The TV detects the signal type automatically and gives priority to
S-video when two signals are detected at the same time. This auto
detection function is only available for AV2.

Adjusting the Volume

Press the

VOL UP

button to

increase the volume. Press

the

VOL DOWN

button to decrease

the volume. The volume level
is displayed on the TV.

Press the

MUTE button

to turn

the sound off. The word “Mute”
appears on the top left corner
of the screen and sound is
temporarily turned off.

Press the

MUTE

button on the remote control or press the

VOL UP

button or VOL DOWN button

to restore the original volume.

MEN

POWER

VOL

C H 4 0

A V 1

Current source setting

TV/AV

Source

MEN

POWER

VOL

Volume up

Volume down