beautypg.com

English setup1 menu, W x – Hitachi CMP4221 User Manual

Page 27

background image

27

ENGLISH

SETUP1 MENU

Language

Off Timer

Screen Wipe

Screen Saver

Off

Standby White

Inverse

Power Saving

English

Picture Image Audio Function Setup 1

050

Panel Lift

Off

Off

Off

Off

Normal

Language

Off Timer

Screen Wipe

Screen Saver

Off

Standby White

Inverse

Power Saving

English

Picture Image Audio Function Setup 1

050

Panel Lift

Off

Off

Off

Off

Normal

Setup 1

*Press "RETURN" button to return to Main Menu, then press

MENU

button to exit OSD.

Selected

characters

W

X

Setup hint

Language

English

Français

Espanõl

Sets the language for the OSD.

Off Timer

0

180

Set the display off time of unit 0 ~ 180 min.

Screen Saver

Off

5 Min.

15 Min.

30 Min.

This moves the picture around the screen in small amounts, at set intervals, to
reduce the panel image retention. This is where stationary objects such as
screen logos; leave a slight image visible after they should have disappeared.

Screen Wipe

Off

30 Min.

60 Min.

This is used to reduce the panel image retention that can occur with stationary
pictures by the white field signal. Select 30. Min or 60 Min. (time limit operation)
and press the OK button. Press the MENU button on the remote control to
return to normal viewing.

Standby White

Off

30 Min.

60 Min.

This function is also provided against the image retention. If time is set for this
item, the screen changes into the white pattern when the monitor enters power
save mode, and it will continue for the period of setting time.

Inverse

Off

On

60 Min.

This function can change each level of RGB signal invert to reduce the panel
image retention. When this function is required. Select On (continuous
operation) or 60Min. (time limit operation) and press the OK button. And press
the Menu or Return button to exit.

Panel Life

Normal

Extend 1

Extend 2

This function is to suppress the contrast of the screen regardless of the
Contrast setting in the Picture Menu. By this control, power consumption can be
reduced or degradation of a panel can be mitigated. The order of power
consumption is Extend 2 Extend 1 Normal.