Hitachi CMP4221 - Manual (Page 14)

14
ENGLISH
Connecting to a PC or a HDMI device
Con
(1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this
device.
x See "Product Specifications" concerning the specifications of this device. 35 ~ 37
(2) Make sure that the power switch of the personal computer or the DVD player is turned off.
(3) Connect the signal input terminal (RGB) or HDMI on the rear panel of this device.
Use a cable that fits the input terminal of this device and the output terminal of the personal computer.
x Depending on the type of personal computer being connected, the use of an optional conversion adapter or the adapter provided with the
personal computer may be necessary in some cases. For details, refer to the instruction manual of the personal computer or ask the personal
computer manufacturer or your local retail dealer.
Speaker(R)
Monitor rear panel
Speaker (L)
SPEAKER TERMINAL
(6 ȍ )10W
Power Cable
Connector
Power
Cord
3.5mm
Stereo
mini jack
To Audio
Output
DVD Player
SPEAKER TERMINAL
(6 ȍ )10W
(D-Sub)
PC
3.5mm
Stereo
mini jack
ϡ 1
To Audio
Output
(HDMI)
ϡ1 In case of using analog audio, when connecting with DVI-HDMI transformation connector, use HDMI audio terminal for input.
x HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
x HDMI (High-Definition Multimedia Interface) is a digital interface based on DVI (Digital Visual Interface), which is an added function for audio visual
equipment. ʳ
Ёʳ ˜̇ʳ˷̂˸̆ʳ́̂̇ʳ˻˴̉˸ʳ˷˸˺̅˴˷˴̇˼̂́ʳ˵̌ʳ̇̅˴́̆̀˼̆̆˼̂́ʳ̆˼́˶˸ʳ˼̇ʳ˼̆ʳ˷˼˺˼̇˴˿ˁʳ
Ёʳ ˪˼̇˻ʳ̂́˿̌ʳ̂́˸ʳ˶˴˵˿˸ʿʳ˼̇ʳ˼̆ʳ̃̂̆̆˼˵˿˸ʳ̇̂ʳ̇̅˴́̆̀˼̇ʳ˵̂̇˻ʳ̃˼˶̇̈̅˸ʳ̆˼˺́˴˿̆ʳ˴́˷ʳ˴̈˷˼̂ʳ̆˼˺́˴˿̆ˁ