Connecting the floppy disk drive externally – Hitachi SA200 User Manual
Page 68
4 Connecting and Installing Optional Devices
56
SA200
Figure 21 Removing the Hard Disk Drive
Connecting the Floppy Disk Drive Externally
If the CD-ROM is being used, you can connect the Floppy Disk
Drive to the parallel port with the provided external floppy drive
cable. To make the connection:
1.
Attach the Floppy Disk Drive to the cable and attach the
other end of the cable to the parallel port.
2.
The External FDD is ready to use. You can disconnect
the FDD cable without turning off the system.
Figure 22 Connecting the Floppy Disk Drive Externally
lonestar.boo : sa200.fm Page 56 Friday, March 6, 1998 10:53 AM