Hitachi SA200 - Manual (Page 104)

B Using the BIOS Setup Program
92 SA200
The Serial Port options are:
•
Enabled
•
Disabled
The default value for this field is: Enabled
The Base I/O Address options are:
•
3F8
•
2F8
•
3E8
•
2E8
The default value for this field is: 3F8
The Interrupt options are:
•
IRQ 3
•
IRQ 4
•
IRQ 10
•
IRQ 11
The default values for this field is: IRQ 4
Infrared Port
The Infrared Port options allow you to enable and choose the COM
port settings for the Infrared Port. If you are not planning to use this
port, you can disable it by choosing “Disabled” to conserve power
or to assign this port to another device for example, a PC card
device).
The Infrared Port options:
•
Enabled
•
Disabled
The default value for this field is: Disabled
The Base I/O Address options are:
•
3F8
•
2F8
•
3E8
•
2E8
lonestar.boo : sa200.fm Page 92 Friday, March 6, 1998 10:53 AM