Hitachi SA200 - Manual (Page 107)

B Using the BIOS Setup Program
SA200 95
Password on Boot
When this option is enabled, you need to enter a password to
complete the boot-up process. The options are:
•
Enabled
•
Disabled
The default value for this field is: Disabled
Password Check During Resume
When this option is enabled, you need to enter a password to
resume from Suspend to RAM or Suspend to Disk mode. The
options are:
•
Enabled
•
Disabled
The default value for this field is: Disabled
Diskette Access
This option controls the use of the floppy drive. The options are:
•
Supervisor
•
User
When set to Supervisor, the computer prompts for the Supervisor
Password before allowing access to the floppy drive.
Note: If Password on Boot is enabled, access to the floppy drive is
determined by the password entered at boot-up.
The default value for this field is: Supervisor
lonestar.boo : sa200.fm Page 95 Friday, March 6, 1998 10:53 AM