HP vp6300 User Manual
Hp vp6300 series digital projector
This manual is related to the following products:
Table of contents
Document Outline
- Title Page
- Contents
- Safety precautions 7
- What’s in the box? 8
- Identifying common features 9
- Setting up the projector 16
- Turning the projector on and off 26
- Making basic adjustments 28
- Using the remote control 29
- Showing a computer screen 31
- Selecting a different source 31
- Hiding or showing the picture 31
- Adjusting the picture and sound 33
- Using the on-screen menu 38
- Performing routine maintenance 43
- Upgrading the projector 47
- Installing the projector 49
- Connecting to a room controller 52
- Troubleshooting suggestions 59
- Testing the projector 64
- Specifications 65
- Safety information 68
- Regulatory information 69
- Setting Up
- Showing Presentations
- Adjusting the Projector
- Maintaining the Projector
- Installing Permanently
- Fixing Problems
- Troubleshooting suggestions
- Warning light problems
- Start-up problems
- Picture problems
- If a “scanning” or “waiting” message is displayed on a blank screen:
- If the wrong input source is displayed:
- If the image is out of focus:
- If an upside-down or reversed image is displayed:
- If the image is too small or too large:
- If the image has slanted sides:
- If the image is stretched:
- If the projected colors seem slightly wrong:
- If the projected colors seem completely wrong:
- If the picture is not clear (ghost images, smearing, poor quality):
- If several picture settings seem completely wrong and you cannot fix them:
- If a scrolling or cut-off image is displayed for a computer connection:
- If the image is flickering or unstable for a computer connection:
- If the image disappears from the computer screen:
- If text or lines from a computer display seem rough or uneven:
- Sound problems
- Interruption problems
- Remote control problems
- Testing the projector
- Troubleshooting suggestions
- Reference
- Index