HP vp6300 - Manual (Page 41)

Using the on-screen menu 41
Sound menu
Setup menu
Color temperature Shifts color toward red or blue.
Stretch Selects how the picture fits on the screen:
• Best fit automatically fits the picture without stretching it.
• 1-to-1 shows each picture dot as one projected dot.
• Reduced fits a standard-shape picture onto a widescreen projection
screen.
Picture shift Moves the picture within the projection area. This is useful if you are viewing
a picture that is smaller than the full projection area, such as a widescreen
movie.
Reset picture shift Resets the picture shift to zero (centered).
Reset this picture mode Restores the current picture mode to its default settings.
Picture menu (continued)
Sound menu
Mute Temporarily turns off the projector’s speakers.
Volume Adjusts the loudness of the speakers.
Internal speakers Sets whether the internal speakers are turned on.
Reset sound settings Restores sound settings to their default settings.
Setup menu
Language Selects the language used by the on-screen menu.
Keystone Corrects the slanted sides of the picture. This compensates for a projector
that is too high or low relative to the screen.
Reset keystone Resets the keystone correction to zero (no correction).
Lamp saver Sets a lower power level for the lamp.
Timeout for menu Sets how many seconds the on-screen menu waits for input before it closes.