HP vp6300 - Manual (Page 55)

Connecting to a room controller 55
Video functions
Command Parameters Description
CSPC 0 to 2, ? Sets or queries the active color space: 0=RGB, 1=YPbPr,
2=YCbCr.
PMOD 0,1,5,? Sets or queries the picture mode: 0=graphics, 1=video,
5=custom.
VSHF value, +, –, ? Sets or queries the vertical shift of the projected image: usable
range is determined by the active input source.
HSHF value, +, –, ? Sets or queries the horizontal shift of the projected image:
usable range is determined by the active input source.
WHIT 0 to 10, +, –, ? Sets or queries the white intensity.
BRT 0 to 100, +, –, ? Sets or queries the brightness.
CON 0 to 100, +, –-, ? Sets or queries the contrast.
SAT 0 to 100, +, –, ? Sets or queries the color saturation.
TNT -45 to 45, +, –, ? Sets or queries the tint.
CTMP 0 to 2, ? Sets or queries the color temperature: 0=warm, 1=neutral,
2=cool.
SHRP 0 to 12, +, –, ? Sets or queries the sharpness.
PENH 0 to 6, +, –, ? Sets or queries the picture enhancement setting.
KEYV -50 to 50, +, –, ? Sets or queries the vertical keystone: 0=no keystone adjustment,
1 to 50=shrinks the top of the display, -1 to -50=shrinks the
bottom of the display.
ASPT 0, 1, 4, ? Sets or queries the aspect ratio: 0=1-to-1, 1=Best Fit,
4=Reduced.
SYNC None Automatically resynchronizes the projector to the active
computer input source.
FREQ -50 to 50, +, –, ? Sets or queries the projector’s timing relative to the active
computer input source.
TRK value, +, –, ? Sets or queries the synchronization of the projector to the active
computer input source.