HP vp6300 - Manual (Page 50)

Installing Permanently 50
1. Attach the projector to the ceiling using an HP ceiling mount kit. Refer to the installation
instructions provided with the ceiling mount kit.
2. After the projector is mounted on the ceiling, adjust the projector settings to match this
setup. Press enter, go to Setup > Advanced setup > Projector position, and select Front
Ceiling.
Installing for rear projection
1. Place the projector 1 to 10 m (3 to 33 ft) behind a translucent screen that is designed for
rear projection.
See “Setting up the projector” on page 16 or “Installing on the ceiling” on page 49 for
more instructions.
2. Press enter, go to Setup > Advanced setup > Projector position. Then select Rear Table or
Rear Ceiling.
Locking the projector
The projector includes a built in slot to secure the projector with a cable and lock (such as the
Kensington MicroSaver lock system, availab
le at many computer stores).
1. Wrap the cable around a secure object, such as a table leg. Loop the cable to create a slip
knot around the stationary object, and be sure it cannot slip off.
2. Insert the lock 1 into the hole and twist the key 2 .