haier HBF205E - Manual (Page 7)

• To ensure that your beer dispenser works at the maximum efficiency it was
designed for, install it in a location where there is proper air circulation,
plumbing and electrical connections.
• Choose a location where the beer dispenser will be away from heat and will
not be exposed to direct sunlight.
• This beer dispenser is designed for indoor use only and should not be
used outdoors.
• This beer dispenser is a freestanding design and should not be placed in a
built-in or recessed area.
• The following dimensions are the recommended clearances around the
beer dispenser.
Sides .....................3/4" (19mm)
Back ..........................1" (25mm)
6
Grounding Instructions
This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the
electric current. This appliance is equipped with a cord containing a grounding
wire and a grounded plug. The plug must be inserted into an outlet that is
properly installed and grounded.
• Improper use of the plug may result in the risk of electric shock.
• Consult a qualified electrician or service technician if the grounding
instructions are not completely understood or if in doubt as to whether
the appliance has been properly grounded.
Wiring Requirements
This appliance must be plugged into a 15Amp, 115 Volt, 60Hz
GROUNDED OUTLET.
Note: Where a standard two-prong outlet is encountered, it is the personal
responsibility and obligation of the consumer to have it replaced with a
properly grounded three-prong outlet.
Extension Cords
We do not recommend the use of an extension cord with this unit.
Power Interruptions
Occasionally, there may be power interruptions due to thunderstorms or
other causes. Remove the power cor d from wall outlet when a power
outage occurs. When power has been restored, re-plug the power
cord into wall outlet.
English
PROPER lOCATION
ElECTRICAl CONNECTIONS