Unpacking and accessories inventory – haier HBF205E User Manual

Page 5

English

1. Remove all packing materials. This includes the foam base and all adhesive

tape holding the accessories both inside and outside.

2. Inspect and remove any remaining packaging, tape or printed materials

before turning on the beer dispenser.

Note: Allow the beer dispenser to stand in an upright position for 2 hours before

turning on the power.

Check all supplied accessories in the carton to be sure that all pieces are present

and in good condition. A checklist of accessories is listed below for your

reference. If you find any accessories that are not in good condition or are

missing, please contact our customer service department for assistance.

Our Toll-Free number is 1-877-337-3639.
2 Keg Couplers (Beer Taps), Low Profile Type

1 CO

Regulator, Single Gauge, Dual Outlet

1 CO

Cylinder, 5 lbs.

1 Cleaning Kit, Including: 32 Ounce Bottle With Cap

4 Ounce Powder Cleaner

Faucet / Line Cleaning Brush

Spanner Wrench (For Installing Beer Faucets to

Draft Arm)

1 Draft Arm, 2 Faucet

Type Including:

2 Faucets

2 Red CO

Lines

4 Hose Clamps

2 Black Knobs

1 3” Lower Gasket

1 CO

Cylinder Ratainer (Bracket, nut and screw)

1 Guardrail

1 Drip Tray

4 Casters

1 Wrench

4 Large Phillips Head Screws

8 Small Phillips Head Screws

2 Retainer Fixing Screws

1 Keg Joining Bracket Kit

UNPACkINg ANd ACCESSORIES INVENTORY