HP 3C905-TX - Manual (Page 5)

Connecting to a Netware 3.12 server
Windows for Workgroups
8 Accept the default installation options by pressing “F10.”
9 At the “Customize Support for Windows” screen, press “F10.”
10 Select 32-bit LAN Drivers and hit the enter key.
11 Page down the Board Drivers list to “USER SPECIFIED 32 BIT DRIVER
LIST” and hit enter.
12 Insert the 3COM Etherlink 3C905 Ethernet card and drivers disk 2, set the
path to “A:\Client32\” and press enter.
13 Select “3Com Fast Etherlink XL / Etherlink XL” and press enter.
14 Accept the default frame types press “F10” to continue, and verify the
following entries for the “Installation Configuration Summary”:
15 YES
16 C:\NOVELL\CLIENT32
17 C:\WINDOWS
18 32-bit LAN drivers
19 3Com Fast Etherlink XL / Etherlink XL Driver
20 Press “F10” to save and continue.
21 When prompted, insert the corresponding disks to complete file transfer
and driver installation.
22 When the install utility is finished, press to restart
the machine.
23 After Windows loads, open the “NETWORK” folder and double-click the
“NETWORK SETUP” icon.
24 Select “Networks” and verify that “Novell Netware (Workstation Shell 4.0
and above)” is listed under “Install Windows support for the following
network only:”
25 Click on “OK” twice and the installation is complete.
c905.bk : ch_1.fb4 Page 3 Thursday, October 22, 1998 9:51 AM