Hitachi VT-M290A User Manual

Page 56

SPECIAL FEATURES

Still Picture During Playback

If you press PAUSE button during playback, the picture will "freeze" on the screen. You
may use this feature to study details of a particular scene. Press PLAY button to
continue playback.

NOTE:

The VCR will automatically switch to the Stop mode, if it is left in the Pause mode

for more than five minutes.

Tracking Adjustment - "DTR"

Tracking adjustment will be set automatically (Digital Tracking function) when you

start playback. "DTR" appears on the display.

When playing pre-recorded tapes or tapes recorded on units other than your own,

noise lines (black and white streaks) may appear on the playback picture. If this occurs,
adjust the Tracking control by pressing CHANNEL

button until the streaks

disappear. To return to the DTR function, stop the tape once and start playback again.

NOTE:

This function is controlled only by the buttons on the VCR. This buttons on the

remote control will not adjust Tracking.

Slow Tracking

You can reduce the noise lines by pressing CHANNEL

button in slow mode

too. Slow Tracking adjustment will not be set automatically.

Note:

Press both PLAY and PAUSE button at the same time in Still mode and press

CHANNEL

button on until the streaks disappear. To return to Still mode, press

Pause button.

This enables you to see the picture in its entirety without distracting noise lines.