Hitachi VT-M290A - Manual (Page 37)

AUTOMATIC TIMER RECORDING
37
Turn on the TV and set the TV channel to the same video output channel located on
the back of the VCR. (CH 3 or 4)
Press VCR/TV button on the remote control so that "VCR" appears on the display.
Clock must be set to the correct time and date before setting the timer.
You must use the remote control for this procedure.
In the example below, the timer is being set to record:
DATE
Saturday 6th May, 1995
SETTING TIME from 7:30AM to 8:50 AM
CHANNEL CH61
TAPE SPEED LP
1
Insert a cassette tape with the erase-protection tab, if necessary, rewind or fast-forward
the tape to the point at which you want to begin recording.
2
Press MENU button on the remote control. The main menu appears on the TV screen.
3
Select item 1 (TIMER PROGRAMMING) with the number buttons.
4
Select your desired program number with the number buttons. (Example: PROGRAM
#1)