Hitachi VT-M290A - Manual (Page 27)

SETTING THE CLOCK
27
You must precede single-digit channel numbers with a zero (02,03,04 and so on).
5
Press ADD/DELETE button so that "ADD" flashes on the display. The channel is added
to the VCR.
For next channel you wish to add, select that channel and follow step [5].
If you press ADD/DELETE button again, the channel is deleted again.
6
Press MENU button. The TV screen returns to TV mode.
To check the channel(s) that has been added, press CH or button.
SETTING THE CLOCK
Set the clock accurately for proper automatic timer recording. We suggest that you use
a TV or radio station as your time source.
VCR Power must be on.
Turn on the TV and set the TV channel to the same video output channel located on
the back of the VCR. (CH 3 or 4)
Press VCR/TV button on the remote control so that "VCR" appears on the display.
You must use remote control for this procedure.