Hitachi VT-M290A - Manual (Page 22)

CHANNEL MEMORY PROGRAMMING (Without a Cable Box) pg. 16.
22
Turn on the TV and set the TV channel to the same video output channel located on the
back of the VCR. (CH3 or 4)
3
Press POWER button to turn on the VCR to that the " " appears on the display.
4
Press the VCR/TV button on the remote control so that "VCR" appears on the display.
"LANGUAGE SELECT" appears on the TV screen.
5
Select 1(ENGLISH) or 2(ESPANOL=SPANISH) with number buttons.
6
Press SELECT or MENU button on the remote control so that "TUNER SET UP"
appears on the TV screen.
7
Press SELECT button once. The tuner scans and memorizes all the active channels in
your area.
After scanning, the tuner stops on the lowest memorized channel.