Hitachi VT-M290A - Manual (Page 43)

AUTOMATIC TIMER RECORDING
43
6b
Select item 3(WEEKLY) with number buttons.
Continue with step [7] on page 22 onwards.
TO CORRECT OR CANCEL A PROGRAM
Press ADD/DELETE button to go back one step from current step during steps [5] -
[14].
If you finished setting the program, repeat steps[2] to [4] on page 21. Then press
SELECT button repeatedly until your desired digit flashes and reset program.
You may cancel the entire program by pressing ADD/DELETE button at step [5].
CHECKING TIMER PROGRAMS
To check a program that is to be recorded using the Automatic Timer Program when the
VCR is in the timer-record mode:
1) Turn on the TV and set the TV channel to the same video output channel located on
the back of the VCR. (CH 3 or 4)
2) Press POWER button so that the "
" indicator disappears from the display.
3) Press VCR/TV button on the remote control so that "VCR" appears on the display.
4) Follow instructions in steps [2] to [5] on page 21. Information which was set for
programming will now appear.
TO STOP RECORDING
Press STOP button on the VCR.