Verifying hba installation, Verifying hba installation 31 – HP XP12000 User Manual
Page 29
Installation
31
Verifying HBA installation
After configuring the ports on the disk array, verify that the HBAs are
installed properly.
Use the ioscan –f command, and verify that the rows shown in the example
are displayed. If these rows are not displayed, check the host adapter
installation (hardware and driver installation) or the host configuration.
Example
# ioscan -f
Class
I
H/W Path
Driver
S/W State H/W Type
Description
===============================================================================================
...
fc
0
8/12
fcT1
CLAIMED
INTERFACE
HP Fibre Channel Mass Storage Adapter
lan
1
8/12.5
fcT1_cntl CLAIMED
INTERFACE
HP Fibre Channel Mass Storage Cntl
fcp
0
8/12.8
fcp
CLAIMED
INTERFACE
FCP Protocol Adapter
ext_bus
2
8/12.8.0.255.0
fcpdev
CLAIMED
INTERFACE
FCP Device Interface
...