HP 3C339 User Manual

Page 4

Text mode
Original mode

1 Connecting to a Netware 3.12 Server

Windows for Workgroups

Execute INSTALL.EXE.

Specify the settings as listed below:

❒ C:\NWCLIENT

❒ Yes

❒ C:\WINDOWS

❒ No

❒ 3Com Fast Etherlink/Etherlink III Bus Master

Under the heading “Select the driver for your network board”, insert the
3Com 3C339 drivers disk and set the path to “A:\NETWARE\CLIENT.”
(If you have an HP preloaded HDD, set path to
“C:\Masters\LanDrv\3C339\NWCLIENT\)

10 Press “Enter” to continue the installation.

11 When prompted, insert the corresponding disks to complete file transfer

and driver installation.

12 When the install utility is finished, press ~~to restart~~

the machine.

13 After Windows loads, open the “NETWORK” folder, double-click the

“NETWORK SETUP” icon.

14 Select “Networks”, and verify that “Novell Netware (Workstation Shell 4.0

and above)” is listed under “Install Windows support for the following
network only:” and click on “OK.”