HP 3C339 - Manual (Page 12)

3 Connecting to a Windows NT Server 3.51
Windows for Workgroups Ver. 3.11
❒ C:\WINDOWS
❒ No
9 Under the heading “Select the driver for your network board”, insert the
3Com 3C339 drivers disk and set the path to “A:\NETWARE\CLIENT.”
(If you have an HP preloaded HDD, set path to
“C:\Masters\LanDrv\3C339\NWCLIENT\)
10 Press “Enter” to continue the installation.
11 When prompted, insert the corresponding disks to complete file transfer
and driver installation.
12 When the install utility is finished, press to restart
the machine.
13 After Windows loads, open the “NETWORK” folder, double-click the
“NETWORK SETUP” icon.
14 At the “Network Setup” dialog box, click on “OK”.
15 Specify your User Name, Workgroup, and Computer Name in “Microsoft
Windows Network Names” dialog box, and click on “OK”.
(The Drivers will now start to copy)
16 Finish the network card installation by clicking on “OK” in the “Network
Setup” message.
17 To complete the installation, click on “Restart Computer” button in the
“Windows Setup” dialog box.