HP SAN Array 1000 - Manual

QuickSpecs
hp StorageWorks
modular SAN array 1000
specific for Tru64 UNIX and OpenVMS only
DA-11621 Canada — Version 2 — April 15, 2003 1
Overview
HP StorageWorks Modular SAN
Array 1000
The HP StorageWorks Modular SAN Array 1000 is a 2 Gb Fibre Channel storage system designed for the entry-
level to mid-range Storage Area Network (SAN). Designed to reduce the complexity, expense and risk of SAN
deployment, the msa1000 is a scaleable, high performance storage system built with investment protection in
mind. The modular design of the msa1000 allows the user to easily add storage capacity on an as needed basis.
The msa1000 combines the array controller shelf and the drive shelf, which holds up to fourteen 1” universal disk
drives in a single 4U rackmount cabinet. More storage can be easily deployed with the addition of up to two
StorageWorks 4314 Enclosures for a maximum storage capacity of 6 TB when using the new 146 GB drives. The
msa1000 provides the latest 2 Gb Fibre Channel technology to the hosts. Besides the single port 2 Gb Fibre
Channel I/O module that comes standard, there is an optional 3-port 2 Gb Fibre Channel hub that also fits inside –
an ideal low cost solution for simple 2-node clustering. There is also a newly introduced 8-port switch that mounts
internally, featuring a low cost per port option that saves rack space. The msa1000 provides Ultra3 SCSI
connections to the hard drives and uses the HP Universal 1” Ultra2, Ultra3, and/or Ultra320 drives. By utilizing
SCSI drives, the msa1000 lowers the total cost of ownership and extends the customer’s hardware investments
into the future.
An alternative firmware version, installed in place of the standard version, now enables support for OpenVMS and
Tru64 UNIX. A copy of this alternative firmware ships with the msa1000 and is also downloadable at no charge
from the HP msa1000 Web site. It replaces the existing firmware that ships with the MSA1000. Included with the
firmware will be instructions on the procedure to upgrade the firmware in either a Tru64 UNIX or an OpenVMS
environment
The msa1000 offers the following
key features
• High performance controller(s) built on DAS to SAN {DtS} architecture for maximum investment protection
• 4U rackmount design combining both the controller and disk shelf
• 2 Gb Fibre Channel host connections
• Ultra3 SCSI connections to drives
• Support for HP Ultra2, Ultra3, and Ultra320 Universal 1” Drives
• Scaleable from 3 to 42 drives via HP StorageWorks 4200/4300 Enclosures
• Support for 1 Gb and 2 Gb Fibre Channel fabrics
What’s new
• Multiple clusters and/or single server access to an individual msa1000.
• Support for concurrent access by servers with OpenVMS and Tru64 UNIX operating systems
• Redundancy (if present) retained while expanding number of drives or enlarging LUNs
• New 3-port embedded hub or 8-port switch option
• Ability to add an additional storage drive enclosure (42/4300) to a msa1000 without power cycling unit
• Support for larger and/or faster drives allowing total capacity to scale to 6 TB
Supported Alpha servers
• DS10, DS10L, DS20E, DS25
• ES40, ES45, ES47, ES80
• GS80, GS160, GS320, GS1280