HP BL460C G6 - Manual (Page 80)

Troubleshooting 80
NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item See
1 • "Integrated Management Log (on page 61 )" or in the HP ProLiant
Servers Troubleshooting Guide located on the Documentation CD or
see "Troubleshooting resources (on page 65 )"
• "Event list error messages" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page
65 )"
2 "Component identification (on page 6 )"
3 System Management Homepage ( https://localhost:2381 )
4 "Power-on problems flowchart (" Server blade power-on problems
flowchart " on page 73 )"
5 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page 65 )"
• Maintenance and service guides for c-Class server blades, located on
the Documentation CD or the HP website
( http://www.hp.com/go/bladesystem/documentation )
• "HP contact information (on page 93 )"
6 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page
65 )"
• Maintenance and service guides for c-Class server blades, located on
the Documentation CD or the HP website
( http://www.hp.com/go/bladesystem/documentation )