HP ProLiant G6 Server DL320 - Manual (Page 42)

Integrated Serial ATA
Controller Simultaneous drive
transfer channels 4 channels
Transfer rate
synchronous (maximum
theoretical) 150 MB/s per channel
Data transfer method HP Smart Array B110i SATA RAID Controller (non-RAID mode)
HP Smart Array B110i SATA RAID Controller (RAID Mode)
Drive support Serial ATA
Data transfer modes Legacy Mode
Combined Mode
Protocol Serial ATA
Feature NCQ (Native Command Queuing); AHCI (Advanced Host Controller
Interface)
RAID levels supported 0, 1, 1+0
RAID Features Supports multiple logical volumes
Setup through ROM based Array Configuration Utility
Installation scripting support
NOTE: This controller does not support Hot Plug functions or LED
functions.
RAID OS Support Microsoft Windows Server 2003/2008
NOTE: In order to implement integrated SATA RAID with Smart Start
8.20 on Windows 2003/2008, the use of a floppy drive is necessary.
Linux (Red Hat, SuSE, UnitedLinux)
Embedded NC326i Dual
Port Gigabit Server
Adapter Network Interface 10Base-T/
100Base-TX/
1000Base-TX
Compatibility IEEE 802.3 10Base-T
IEEE 802.3ab
1000Base-T
IEEE 802.3u 100Base-
TX
Data Transfer Method Four lane (x4), 100MHz PCI Express Reference Clock
Controller BCM5715
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex) 20 Mb/s
100Base-TX (Half-
Duplex) 100 Mb/s
100Base-TX (Full-
Duplex) 200 Mb/s
1000Base-TX (Half and
Full-Duplex) 2000 Mb/s
Connector RJ-45
Cable Support 10Base-T Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX Category 5 UTP; up to 328 ft (100 m)
QuickSpecs
HP ProLiant DL320 Generation 6
Technical Specifications
DA - 13344 Worldwide QuickSpecs — Version 19 — 4.22.2010 Page 42