Harbor Freight Tools 93212 - Manual (Page 10)

Page 10 For technical questions, please call 1-800-444-3353. SKU 93212
controls on the Front of the Lathe
Forward-OFF-Reverse Switch (181)
Power Switch (178)
Speed Control Knob (180)
Figure 2
Power switch (178)
Turns on and off power to the motor.
When the Power Switch is lit, the motor
is on.
Forward-oFF-reverse switch (181)
Changes the Spindle (3) (Chuck (2))
rotation from Forward (clockwise),
to OFF (no rotation), to Reverse
(counterclockwise).
do not change the Forward-oFF-
reverse switch direction while the
lathe is running.
speed control knob (180)
Adjusts the Spindle (3) speed from 0 to
2500 RPMs.
Check that this knob is at 0 before
turning on the Lathe.
note: The Speed Control Knob (180) is
dependant on the H/L Gear Shift Lever
(33). When the H/L Gear Shift Lever is in
the Low setting, the Speed Control Knob
runs from 0 to 1100 RPM. When the H/L
Gear Shift Lever is in the High setting,
the Speed Control Knob runs from 0 to
2500 RPM.
controls on the Back of the Lathe
Figure 3
H/L Gear Shift Lever (33)
Feed Direction Selector (35)
Feed direction selector (35)
Changes the Lead Screw (129) rotation
from Forward (toward the Chuck) to
Neutral (no rotation), to Reverse (away
from the Chuck).
do not change the Feed direction
selector while the Lathe is running.
h/L gear shift Lever (33)
Changes the spindle speed range from
High (0 - 2500 RPM) to Low (0-1100
RPM).
do not adjust the h/L gear shift
Lever while the Lathe is running.
PoWer controLs oVerVieW
reV 10b