Switching source signals, Adjusting the volume, Current source setting – HANNspree K226-10A1 User Manual

Page 29: Volume level volume up volume down

Text mode
Original mode

Switching Source Signals

Press SOURCE on the remote
control or control panel to select
the incoming source signal.

The current source setting
(TV/CATV, S-Video, or AV)
appears on the top left corner of
the screen.

Note
The TV supports S-Video input in addition to normal video and audio sig-

nals.

Adjusting the Volume

Press the VOL UP button to
increase the volume. Press the
VOL DOWN button to decrease
the volume. The volume level is
displayed on the TV.

Press MUTE on the remote
control to turn the sound off.
Press MUTE on the remote
control or press the VOL UP/ VOL DOWN buttons to turn the sound
on.

VOL

SOURCE

MENU

S-VIDEO

Current source setting

VOL

4 8

SOURCE

MENU

Volume level

Volume up

Volume down