Hoover Vacuum Cleaners - Manual (Page 9)

The cleaning tools have many uses. Select the tool best suited for the
cleaning task from the descriptions below. Adjust the Suction Regulator
to select the amount of suction appropriate to the cleaning task.
1. Crevice tool for radiators,
dresser drawers, spaces between
kitchen appliances.
2. Wall/floor brush for walls and
very irregular hard surface floors
such as brick and slate.
3. Furniture nozzle for upholster-
ed furniture, draperies, tapes-
tries, mattresses, clothing, auto-
mobile interiors and carpeted
stairs.
4. Dusting brush for carved fur-
niture, table tops, books, lamps,
lighting fixtures, Venetian blinds,
baseboards, shutters and regis-
To connect and
remove tools
To connect the tools, insert end
of tool into the extension wand
and snap into position. To
disconnect, press down on the
center of the spring latch and
remove tool.
Tools may also be attached to the
handle by rotating the plastic
latch ring to accept the button
projection on the tool. Then, turn
the latch ring as shown to lock
the tool in place.
To remove the tool, reverse the
above procedure.