How to use – Hoover Vacuum Cleaners User Manual

Page 8

How to use

Handle adjustment

The handle has two positions
when used with the power noz-
zle: Upright and Operating.

To lower handle to the Operating

position, place your foot on the
power nozzle and push the han-

dle down.

Automatic nozzle

adjustment

The power nozzle adjusts auto-

matically to effectively clean hard

surface floors and all carpet from

low pile to shag.

However, the nozzle is not rec-
ommended for very irregular

floor surfaces such as brick,
slate and certain parquet floors.
To clean these floors, use the
Wall/Floor Brush.

It is suggested that you use the
power nozzle with the Suction
Regulator closed for full suction.
If the power nozzle is difficult to
push, open the Suction Regula-

tor.

Edge cleaning

Brushed edge cleaning is provid-

ed on the right side of the nozzle
to remove imbedded dirt in car-
pet near baseboards and furni-
ture. Guide the right side of the

nozzle parallel to the edge of the
carpet or furniture for brushed
edge cleaning.

Standard edge cleaning is pro-

vided on the left side of the noz-
zle to remove surface dust and lit-
ter. Guide the left side of the noz-

zle parallel to the edge of the car-

pet for standard edge cleaning.

CLOSED