How to replace the belt – Hoover Vacuum Cleaners User Manual

Page 15

How to replace the belt

Disconnect cleaner from elec-

trical outlet and disconnect

power nozzle from extension

wands.

Turn nozzle over and unscrew the
2 Phillips head screws from the

nozzle base.

Return nozzle to original position

and lift up back of nozzle cover.
Then remove cover, rotating it for-
ward and lifting it off.

To remove the agitator, position
your hand underneath the nozzle

base at the agitator opening and
push up the belt side of the agita-
tor. Remove agitator and old belt.

Place one end of new belt around

the motor pulley, with lettering on
outside of belt.

Then slip other end of belt around
the plastic pulley end of the

agitator.