Hoover Vacuum Cleaners - Manual (Page 13)

Adjust bag around the motor
housing and open the folds of the
bag to allow the bag to properly
fill. Make sure all four folds are
open.
Note: A bag that does not expand properly may restrict air flow. In this
event, check the bag, making sure all the folds are open. High suction on
some carpet surfaces can cause the nozzle to hug the carpet and also
restrict air flow, When this occurs, reducing the suction with the Suction
Regulator may be helpful.
C O N N E C T O R
Removing larger items from car-
pet and floor surfaces before vac-
uuming will help prevent obstruc-
tions in the hose wands or nozzle
connector, and maintain the
cleaning effectiveness of your
cleaner.
To check for obstructions, first
disconnect power nozzle cord
and wands from cleaner base.
Turn cleaner “ON” and check
hose end for suction. Remove any
obstructions. Remove power
nozzle from wands and attach
wands to hose. Check for suction
and remove any obstructions.
Before attaching power nozzle to
wands, check nozzle connector.
While holding nozzle, push noz-
zle connector down to lowest po-
Look into nozzle connector and
remove any obstructions.
12