HP 2300dn - Manual (Page 170)

168 Appendix C Printer memory and expansion ENWW
Installing an HP Jetdirect EIO card
1 Turn the printer off, and disconnect the power cord.
2 Open the interface cable door by pressing on the release tabs and
swinging the door outward. Disconnect all interface cables.
3 Locate the EIO slot. Firmly insert the HP Jetdirect EIO card into the
EIO slot. Twist in the retaining screws.
4 Attach the appropriate network cable to the EIO card.
5 Reconnect the interface cable(s) and the power cord. Reinstall the
interface cable door. Turn the printer on.
Note
Print a configuration page to check that the HP Jetdirect EIO card
appears as an installed option. See
“Configuration page” on page 72 . If
this page does not print in your language, see “Printing special pages”
on page 87 .
When you print a configuration page, an HP Jetdirect Configuration
page that contains network configuration and status information will also
print.
1
3
4
2
5 5