HP E 800 - Manual (Page 7)

Setting Up the HP NetServer E 800
3
Step 2: Opening the HP NetServer
Tools Required:
•
¼ inch flat-blade screwdriver
•
Torx T-15 driver
WARNING Before removing the cover, always disconnect the power cord
and remove the telephone cable.
Disconnect the power cord to avoid exposure to high energy
levels that may cause burns when parts are short-circuited by
metal objects such as tools or jewelry. Disconnect telephone
cables to avoid exposure to shock hazard from telephone
ringing voltages.
Key-
Lock
Slotted
Thumbscrews(6)