HP E 800 User Manual
Page 10
Setting Up the HP NetServer E 800
6
Step 4: Installing Mass Storage Devices
•
The NetServer is internally limited to 7 mass storage shelves.
The flexible disk drive and CD-ROM drive, which are standard on all
models of the HP NetServer E 800, occupy shelves 1 and 2 respectively.
•
If a backup tape drive is used, it will occupy shelf 3.
•
Shelves 4, 5, 6, and 7 are available for up to four SCSI hard drives and at
least one is required for the boot drive.
•
IDE drives are not supported in this NetServer.
CAUTION
Do not connect high voltage differential (HVD) SCSI devices
on the SCSI bus or you will damage the other devices.
1. Remove the Drive Cage by loosening the three captive screws.
Top of Chassis (Side view)
Captive Screws (3)
Front of
HP NetServer
Hard Disk
Drive Cage
(removable)
Shelf 1
Shelf 2
Shelf 3
Shelves 4-7 (4)
2. Install the SCSI hard disk drive.
- UX B6941-90001 (548 pages)
- A3661B (95 pages)
- C100/110 (252 pages)
- L1702 (45 pages)
- 576X-B (1 page)
- rx5670 (13 pages)
- ProLiant PC2-6400 (38 pages)
- PC (120 pages)
- S3240 (2 pages)
- LC 2000R (194 pages)
- GS80 (41 pages)
- COMPAQ DX2710 MT (107 pages)
- TOUCHSMART 9100 (62 pages)
- BC1500 (13 pages)
- Proliant DL580 (53 pages)
- Proliant DL580 (48 pages)
- DX2200 (31 pages)
- ProLiant Server Blade BL460c (31 pages)
- P6000 (105 pages)
- d530 Series (2 pages)
- dc5700 (216 pages)
- RX7620-16 (43 pages)
- ProLiant ML370 G5 (46 pages)
- PROLIANT ML350 G6 (54 pages)
- BL35P (22 pages)
- COMPAQ DC5750 (214 pages)
- Agent-Desktop-Laptop Computer (23 pages)
- DL380 G7 (126 pages)
- xw8600 (73 pages)
- Pavilion A6140 (2 pages)
- Z800 (55 pages)
- 8080 ELITE BUSINESS (284 pages)
- Vectra XE320 (82 pages)
- Vectra XE320 (32 pages)
- VECTRA VL800 (72 pages)
- AA-RTDRB-TE (146 pages)
- BL465C (66 pages)
- DM4 (113 pages)
- PROLIANT 580554-001 (87 pages)
- ProLiant ML330 (34 pages)
- ProLiant ML330 (44 pages)
- PROLIANT BL465C G7 (30 pages)
- LH 3r (23 pages)
- Compaq dc7900 (3 pages)
- T5000 (41 pages)