HANNspree Liquid Crystal Display Television (LCD TV) DT07-10A1 User Manual

Page 28

Switching Source Signals

Press the

SOURCE

button on the

remote control or the

TV/AV

button

on the control panel to select the
incoming source signal.

The current source setting CH XX
appears on the top left corner of
the screen; AV1 or AV2 appears on
the bottom right corner of the
screen.

Note:

The TV supports S-Video input in addition to normal video and audio

signals. The TV detects the signal type automatically and gives priority to

S-video when two signals are detected at the same time. This auto

detection function is only available for AV2.

Adjusting the Volume

Press the

VOL UP button

increase the volume. Press the

VOL DOWN button

to decrease the

volume. The volume level is dis-

played on the TV.

Press the

MUTE button

on the

remote control to turn the sound
off. The word “Mute” appears on
the top left corner of the screen
and sound is temporarily turned
off.

Press the

MUTE button

on the remote control or press the

VOL UP but-

ton or VOL DOWN button

to restore the original volume.

C H 4 0

A V 1

TV/AV

Current source setting

TV/AV (Source)

Volume up

Volume

down

MUTE