HP ProLiant DL380 - Manual

Front View: Rear View:
1. Quick removal access panel 1. PCI slot 5
2. Intel Quad-Core Processor (Performance models
include two processors) 2. PCI slot 6
3. PCI slot 4
3. Second Intel Quad-Core Processor 4. PCI slot 2
4. Eighteen slots: DDR3 Registered (RDIMM) or
Unbuffered (UDIMM) memory 5. PCI slot 3
6. PCI slot 1
7. Power supply 2
5. Hot-plug fans, full N+1 redundancy 8. Power supply 1
6. Slim Optical Bay (SATA DVD-RW Optical Drive
included on Performance models) 9. USB connectors (2)
10. Video connector
7. UID LED button 11. NIC 1 connector
8. Health LED 12. NIC 2 connector
9. Power On/Standby button and system power LED 13. Mouse connector
10. USB connectors (2) 14. Keyboard connector
11. Video connector 15. Serial connector
12. Systems Insight Display 16. iLO2 connector
17. NIC 3 connector
18. NIC 4 connector
At A Glance
The HP ProLiant DL380 G6 Server continues to deliver on its heritage of engineering excellence with increased flexibility
and performance, enterprise-class uptime and manageability, 2-socket Intel Xeon performance, and 2U density for a variety
of applications.
Processors:
Up to 2 Quad-Core or Dual-Core Intel® Xeon® processor 5500 sequence)
Intel® 5520 Chipset
Memory:
Up to 192GB, using PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated
at 2 DIMMs per Channel in 12 slots
NOTE: If only one processor is installed, only half the DIMM slots are available
Up to 24GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully
populated at 2 DIMMs per Channel in 12 slots
Two DIMMs Per Channel at 1333MHz supported with ROM update via ROM Based Setup Utility (RBSU) for
1333MHz RDIMMs. UDIMM support is only on 12-slot servers.
Storage Controller:
Entry Models: HP Smart Array P410i/Zero Memory Controller (RAID 0/1/1+0)
Base Models: HP Smart Array P410i/256 MB Controller (RAID 0/1/1+0/5/5+0)
QuickSpecs
HP ProLiant DL380 Generation 6
Overview
DA - 13234 Worldwide QuickSpecs — Version 16 — 8.28.2009 Page 1