HP 445946-001 - Manual (Page 62)

VLANs
62
2. Configure the VLANs and their member ports. Since all ports are by default configured for VLAN 1,
configure only those ports that belong to VLAN 2.
>> /cfg/l2/vlan 2
>> VLAN 2# add 1 (Add port 1 to VLAN 2)
Current ports for VLAN 2: empty
Pending new ports for VLAN 2: 1
>> VLAN 2# add 18 (Add port 18 to VLAN 2)
Current ports for VLAN 2: 1
Pending new ports for VLAN 2: 18
>> VLAN 2# add 20 (Add port 20 to VLAN 2)
Port 20 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 2 [y/n]: y
Current ports for VLAN 2: 1, 18
Pending new ports for VLAN 2: 20
>> VLAN 3# add 18 (Add port 18 to VLAN 3)
Current ports for VLAN 3:
Pending new ports for VLAN 3: 18
>> apply (Apply the port configurations)
>> save (Save the port configurations)