HP dx7300 - Manual (Page 39)

QuickSpecs
HP Compaq dx7300 Business PC
Technical Specifications - Removable Storage
DA – 12583 EMEA • Version 1 • September 18, 2006 Page 39
USB Interface USB 2.0 High-speed device
Advance protocol support Supports hardware ECC (Error Correction Code) function
• Supports hardware CRC (Cyclic Redundancy Check) function
• Supports MS 4-bit parallel transfer mode
• Supports MS-PRO 4-bit parallel transfer mode
• Supports SD 4-bit parallel transfer mode
• Supports high-speed 50-MHz SD 4-bit card (version 1.1)
• Support high-speed 52-MHz MMC 8-bit card
Supported media type
with card adapter
•
MicroSD (T-Flash)
• Memory Stick Micro
Mechanical
Operational
Environmental Extremes Test Parameters/Conditions – Power applied,
unit operating on system ±5% nominal supply
voltage.
10°C 10% R.H. • 24 hours
10°C 90% R.H. • 24 hours
20°C 90% R.H. • 24 hours
30°C 90% R.H. • 24 hours
40°C 90% R.H. • 24 hours
50°C 90% R.H. • 24 hours
50°C 10% R.H. • 24 hours Environmental
Storage Environmental
Extremes Test Parameters/Conditions
60°C @ 80% R.H. for 96 hours
-30°C @ 20% R.H. for 48 hours
No power applied
Delta °C < 1.0°C/min
Delta % R.H. < 1.5% R.H./min
Operating system support Microsoft Windows 2000 (Service Pack 3 or greater), Windows XP
Home, Windows XP Professional
HP 16-in-1 Media Card
Reader
Approvals USB-IF, WHQL, Compliant with USB Mass Storage Class Bulk only
Transport Specification Rev. 1.0, Compliant Intel Front Panel I/O
Connectivity Design Guide V. 1.2
FCC, CE, BSMI, C-Tick, VCCI, MIC, cUL, TUV-T