Quickspecs – HP dx7300 User Manual

Page 22

QuickSpecs

HP Compaq dx7300 Business PC

Technical Specifications - Graphics

DA – 12583 EMEA • Version 1 • September 18, 2006

Page 22

list. Not all modes will support video playback and some supported modes may use software MC (motion compensation) rather
than hardware MC. Not all modes will support 3D acceleration depending on the system configuration (e.g., resolution selected,
size of frame buffer, number of installed memory modules, etc.).
NOTE: Other resolutions and refresh rates may be selectable but are not recommended.

Models

DY674A Intel DVI ADD2 adapter

Form Factor

Low-profile card

DVI-D Connector

Compliant with DDWG (Digital Display Working Group) and VESA
specifications for a single-link digital DVI (DVI-D) connector.

Dual Head Support

Yes, when used with the integrated VGA connector

Display Devices
Supported

HP L1530
HP L1740
HP L1755
HP L1940
HP L1955
HP L2035
HP L2335

NOTE: The DVI ADD2 card offers optimal performance with any display that meets applicable VESA
standards.

Color Depth

All modes support 8-bpp, 16-bpp, and 24-bpp color depths (up to 16.7
million colors)

Host Interface Connector Mechanically compliant with PCI-E standard

Complies with the Intel ADD2 and Intel Serial Digital Video Output (SDVO)
specifications

Dot Clock

165 MHz maximum

DVI ADD2 Graphics

Display Modes

Supports display modes that require up to 165-MHz bandwidth on the
link, as shown in the following table.

Resolution

60-Hz LCD

60-Hz

75-Hz

85-Hz

Blanking

5% reduced

GTF

640 x 480

VGA

Yes

800 x 600

SVGA

Yes

1024 x 768

XGA

Yes

1280 x 1024

SXGA

Yes

1600 x 1200

UXGA

Yes

Bus Type

PCI Express (x16 lanes)

Maximum Vertical Refresh
Rate

85 Hz

Display Support

Integrated 400 MHz RAMDAC

Display Max Resolution

2048 x 1536

ATI RADEON X1300
PCIe Graphics Card
(256 MB)

Board Display Options

DVI-I + TV
DVI-I supports analog CRT or flat panel or digital flat panel (using DVI-A,
DVI-D or DVI-I connector)