Troubleshooting – Hunter Fan WHISPERWIND2000TM User Manual
Page 23
23
41277-01 05/98
®
TROUBLESHOOTING
Nothing happens; fan does not move.
Noisy operation.
1. Power turned off, fuse blown, or
circuit breaker tripped.
2. Loose wire connections or wrong
connections.
3. Motor reversing switch not en-
gaged.
4. Pull chain switch not “on.”
1. Blade screwed loosely to Speed
Ring™.
2. Blade cracked.
3. Using non-approved speed control.
4. Globe screwed loosely to fitter.
PROBLEM
PROBABLE CAUSE
SOLUTION
1. Turn power on, replace fuse, or re-
set breaker.
2. Loosen canopy, check all connections
according to STEP 4 - WIRING THE
FAN (tur n power off before
checking).
3. Push switch firmly side to side.
4. Pull the pull chain switch.
1. Tighten screws until snug.
2. Replace all blades.
3. Change to approved speed control.
4. Hand-tighten the light kit screws.
Ensure that rubber noise isolators
are installed.
- 23483 (4 pages)
- 21585 (2 pages)
- 28425 (4 pages)
- Type 7 Models (16 pages)
- 41753-01 (15 pages)
- 28343 (2 pages)
- 41844-01 (9 pages)
- 28439 (2 pages)
- 41081-01 (12 pages)
- 28487 (2 pages)
- 28544 (2 pages)
- 20810 (2 pages)
- Type T Models (13 pages)
- 20490 (2 pages)
- 23971 (2 pages)
- 22562 (4 pages)
- 23867 (4 pages)
- 20400 (2 pages)
- 28876 (4 pages)
- 22793 (4 pages)
- 22068 (4 pages)
- Type B Models (15 pages)
- 28872 (2 pages)
- 28608 (2 pages)
- 23683 (2 pages)
- 20081013 (24 pages)
- 20406 (2 pages)
- 21575 (4 pages)
- 28522 (4 pages)
- 23864 (2 pages)
- 21977 (1 page)
- 22540 (4 pages)
- 20543 (2 pages)
- 23972 (4 pages)
- 20347 (4 pages)
- 28448 (3 pages)
- 23785 (4 pages)
- 41615-01 (4 pages)
- 20534 (2 pages)
- 23264 (2 pages)
- 28153 (2 pages)
- 28081 (4 pages)
- 21190 (2 pages)
- 23782 (4 pages)
- 21580 (2 pages)