Huffy NETWORK PACK KA-DV300 - Manual (Page 14)

14 P/N 214326 8/98
8.
6.
Install rod (7) through holes in bottom pole (6) section
and eyebolt (8).
8
7
6
10
1
6
9
IMPORTANT!
DO NOT
OVER TIGHTEN.
Carefully place unit on its side, and
secure pole bottom (6) to tank as
shown, a deep socket is recommended.
Upright unit.
NOTE: Keep unnecessary pressure
off of the pole assembly when in this
position.
7
8
Insert pole assembly into tank assembly
as shown.
7.
6
TWO PERSON MINIMUM
REQUIRED FOR THIS
PROCEDURE.
NOT FOLLOWING
RECOMMENDATION MAY
RESULT IN BODILY INJURY.
WARNING