HP 1103 - Manual (Page 61)

Top cover
NOTE: The top cover includes the speakers, TouchPad and TouchPad cable.
Description Spare part number
Top cover (includes TouchPad, TouchPad cable, and speaker) 633488-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see Battery on page 35 ).
b. Service access cover (see Service access cover on page 38 ).
c. Keyboard (see Keyboard on page 50 ).
Remove the top cover.
1. Open the computer as far as possible.
2. Remove the 2 Phillips 2.0×2.5 screws (1) that secure the interior hinge covers to the display
hinges.
NOTE: The screws used for these hinge covers require a Phillips 00 screwdriver.
Component replacement procedures 53