Rtc battery – HP 1103 User Manual
Page 56
2.
Grasp the edge of the memory module (2), and then pull it out of the memory module slot.
NOTE:
Memory modules are designed with a notch (3) to prevent incorrect insertion into the
memory module slot.
Reverse this procedure to install the memory module.
RTC battery
Description
Spare part number
RTC battery
622351-001
Before removing the real-time clock (RTC) battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see
b.
Service access cover (see
Service access cover on page 38
Remove the RTC battery:
1.
Disconnect the RTC battery cable (1) from the system board.
48
Chapter 4 Removal and replacement procedures