HP PE4240N - Manual (Page 7)

Safety 3
Position the power cord carefully: Route the power cord so that it will not be walked on,
tripped over, or pinched by items placed upon or against it. Pay particular attention to the plug,
electrical outlet, and the point where the power cord exits the product.
Overloading: Do not overload an electrical outlet, power strip, or convenience receptacle. The
overall system load must not exceed 80% of the power strip input rating.
Observe extension cord ratings: If an extension cord or power strip is used, make sure that the
cord or strip is rated for the product and that the total ampere ratings of all products plugged into the
extension cord or power strip do not exceed 80% of the extension cord or strip ampere ratings limit.
Using cables and power cords:
•
Plug the product into a grounded (earthed) electrical outlet that is easily accessible at all times.
•
Do not disable the power cord grounding plug. The ground plug is an important safety feature.
•
Disconnect power from the TV by unplugging the power cord from the electrical outlet.
•
Do not pull on cords and cables. When unplugging the cord from an electrical outlet, grasp and
pull the cord by the plug.
•
Do not attempt to power the TV with converter kits sold for appliances.
•
Unplug the TV from the electrical outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners.
WARNING: Do not place any objects on top of the TV. Spilled water or metal objects
may cause short circuit, fire, or electric shock if they penetrate into the housing of
the TV.
Never use a damaged power cord. Do not place power cords in areas where they can
be pinched, stepped on, or otherwise compromised. Heavy objects, heat, chemicals,
or tensile force may damage the power cord and cause fire or electric shock.
Do not change or open the back cover. Removing the back cover of the TV may cause
fire or electric shock. Contact the manufacturer when inspection or adjustment is
required.
Unplug the TV during lightning storms or when unused for long periods of time.
Do not use the TV if any abnormality occurs. If any smoke or odor becomes apparent,
unplug the power cord and contact the manufacturer immediately.
Do not try to repair the TV on your own.
Cleaning the TV
Use a dry, soft cloth to remove dust from the TV screen and the chassis.
•
Unplug the TV before cleaning the screen.
•
A special anti-glare coating is applied to the screen of your TV. Using solvents such as alcohol
or abrasive material such as a power towel may affect the screen coating or bezel paint.
•
Do not expose the product to volatile gas or fluid such as a pesticide.
•
Do not put the TV in contact with vinyl or rubber products for a long period of time. Extended
contact may result in the removal of the coating or degradation of the surface.