HP PE4240N - Manual (Page 44)

40 Using the TV
Adjusting the picture
This section describes two procedures:
•
How to adjust the main picture.
•
How to have the TV automatically adjust the picture (focus, clock, horizontal and vertical position
and size) for the active VGA input signal.
How to adjust the main picture
1 Select TV as the input source for the main TV picture by using the front panel buttons or the TV
remote control. Refer to “Selecting the input source” on page 26.
2 Display the OSD menus. Refer to “Using the On Screen Display (OSD) Controls” on page 28 for
steps to open and use the menus using the front panel buttons (or the remote control buttons).
3 Select and display Picture menu.
4 Highlight and select an item, such as Contrast, so it turns red. Adjust the setting, and then press
Setting front panel button (Enter on the remote control).
Color Temperature adjusts the color temperature and white balance ratio: Cool is high (a blue
temperature), Normal is middle (standard), and Warm is low (a red temperature).