HP Photosmart R837 User Manual
Page 43
My image is blurry.
●
).
●
Use
Steady Photo shooting mode (see Steady Photo under
●
Use a tripod to hold the camera steady, or improve lighting conditions.
●
Set the flash to
Auto Flash or Flash On and set the shooting mode to
Action.
My image is too bright.
●
).
●
Move back from the subject and use zoom.
●
Adjust Exposure Compensation (see Exposure Compensation under
the Picture Capture and Video Record menus on page 18
).
●
Use Exposure Bracketing (see Exposure Bracketing under
Capture and Video Record menus on page 18
My image is too dark.
●
Wait for natural lighting conditions to improve, use the flash (see
) or add indirect lighting.
●
Adjust Exposure Compensation (see Exposure Compensation under
the Picture Capture and Video Record menus on page 18
).
●
Use Exposure Bracketing (see Exposure Bracketing under
Capture and Video Record menus on page 18
●
Use Adaptive Lighting (see Adaptive Lighting under
and Video Record menus on page 18
).
●
Use the Spot setting for
AE Metering (see AE Metering under
Capture and Video Record menus on page 18
●
If the subject you are trying to capture is outside the flash range (see Flash working
distance under
), turn off the flash. This causes a
longer exposure time, so use a tripod or hold the camera steady.
My image is grainy.
●
Add indirect lighting, use the flash (see
), or wait for
natural lighting conditions to improve.
●
Use a lower ISO Speed setting (see ISO Speed under
and Video Record menus on page 18
.
●
Using
Steady Photo shooting mode can increase graininess.
●
You may have zoomed in too far using digital zoom (see
).
●
If the camera is warm, the effect will diminish as the camera cools. For best image
quality, avoid storing the camera in very hot locations.
Images are missing on my camera.
Remove the memory card and see if the images are stored in internal memory. If so,
transfer the images to the memory card (see Move Images to Card under
).
HP Photosmart R837 Digital Camera
43